Recommended at least 2 coats application, if needed 3 coats might be applied. Consumptionġ,0 - 1,5 kg/m² for each coat. In outer surface applications, the surface has to be protected from sun, wind, frost or rain during the first 24 hours. Prepared mixture have to be used within 2 hours. ![]() Surface should be wetted before second layer. Each layer must be applied after the first layer begin to harden and still wet. Brush application direction for each layer must be perpendicular to each other. Mixture should be applied with a brush as 2 or 3 layers. Continue mixing until obtaining a homogenous mixture without any agglomerate (approximately 3-5 minutes). Liquid component B is poured into a clean container and mix at a low speed and then slowly added CHIMEX 127 powder component A. After the first coat of CHIMEX 127, sharp tips and horizontal/vertical joints which are suitable cracking should be chamfered with REPAMERK 1 repair mortar or PH 127 then second coat of CHIMEX 127 should be applied. Application surface has to be wetted and then waited until it becomes wet/dry. Big pores and cracks should be filled with REPAMERK 1 repair mortar. ![]() The application surface must be durable, clean and clean off materials which prevent bonding, such as dust, oil, rust and remove loose pieces.
0 Comments
Leave a Reply. |